Catterpillar Road, P.O. Box: 40328, Sharjah-UAE.

+971 6 5322985

info@mssptrading.com

Rotary Gear Pump Type HGBX

Overview

Capacity from 2.5 LPM to 400 LPM max. Working Pressure 11Kg/CM2, Temp. 90ºC Viscosity, 10,000 CST.

  • Compact
  • Low Noise
  • Efficient

 

Foreword

ROTODEL rotary pump type “HGBX” is a self priming bi-directional positive displacement gear pump in simple two piece cast iron construction with single helical modified profile carbon steel gears shrunk fitted on alloy steel hardened & ground shaft as impeller firmly supported on 4 nos of seld-lubricated sintered bronze bush bearing. The pump can be run in either direction with change in Inlet-Outlet port position.The relief valve operations can be reversed by simply changning the R.V. parts on opposite side. The motorised pump-set in mono-block design ensures perfect alignment, saves space & reduces down time.

  • casing & covers – ci gr20, is-210
  • Drive shafts-EN-9 hardened & ground
  • Impeller gears-EN-8 toughened
  • Bush-Bearing-sintered bronze
  • Seals-Oilseals nitrile rubber
  • R.V. Spring- AISI S.S.302
  • R.V.Ball Valve-EN-31 hardened & ground
  • R.V. Screw & plug-Brass
  • Key for Coupling-Mild steel.
  • For calculating power requirement, multiply unit hp per Kg Pressure with duty point pressure & add no load viscous hp of appropriate viscosity, adquate margin may be provided to this.
  • Higher/Lower rating motor can be employed based on duty point power requirement than what is specified as above.
  • Bracket in different height available to match the height of electric motor.

“HGBX” series pumps are designed to run at 1440 RPM up to viscosity of 500 CST, for higher viscosity it is desirable to reduce speed for sizes above 11/4″. Performance at low speed is always advantageous as it improves efficiency reduces noise level & NPSHR & enhances operational life, Capacity will reduce in proportion to the speed.

H.P. Chart

Pump
Model
& Size’P.Q’ BSP
Capacity at
1440 RPM
POwer Req. WT. in KG.
No Load
Viscous hp
Unit hp.
per Kg.
press
LPM US GPM M3/hr 200
CST
500
CST
Pump with Motor Pump with L-Type Braket
HGBX-025
1/4″ X 1/4″
2.5 0.65 0.15 0.10 0.20 0.10 1.5 9.0
5.0 1.30 0.30 0.15 0.22 0.012
HGBX-050
1/2″ X 1/2″
10.0 2.05 0.60 0.20 0.27 0.025 2.0 12.0
15.0 4.00 0.90 0.25 0.22 0.037
HGBX-075
3/4″ X 3/4″
20.0 5.30 1.20 0.40 0.45 0.050 4.0 17.0
30.0 6.65 1.50 0.40 0.50 0.065
HGBX-100
1″ X 1″
35.0 9.30 2.10 0.50 0.60 0.078 5.0 32.0
50.0 13.30 3.00 0.60 0.70 0.120
HGBX-125
1 1/4″ X 1 1/4″
60.0 16.00 3.60 0.75 0.90 0.134 7.5 45.0
75.0 20.00 4.50 0.80 0.95 0.170
HGBX-150
1 1/2″ X 1 1/2″
100.0 26.60 6.00 0.90 1.05 0.230 9.0 65.0
125.0 33.30 7.50 1.00 1.15 0.280
HGBX-200
2″ X 2″
150.0 40.00 9.00 1.05 1.20 0.340 16.0 90.0
200.0 53.30 12.00 1.15 1.30 0.450
250.0 65.80 15.00 1.25 1.40 0.560
HGBX-250
2 1/2″ X 2 1/2″
300.0 80.00 18.00 1.35 1.55 0.670 33.0 120.0
350.0 93.30 21.00 1.50 1.70 0.780
400.0 105.2 24.00 1.65 1.85 0.890

Dimension

Pump
Model
& Size’P.Q’ BSP
Pump & Pumpset Dimensions
Motor
hp &
Frame
Size
Overall Mounting Shaft
A
A1
B
B1
C
L
H3
h3
D2
E
D3
D4
D5
D6
d1
B2
F
F1
K
K1
M
M1
N
N1
D
D1
E1
J
H
H1
h
h1
HGBX-025
1/4″ X 1/4″
0.50 118.5 64 88 107 45 72 59 8.0 74 78 35 60 09 25 63 71
0.71 368 145 77 170 47.5 6.8 8.0 163 136 90 112 11.0 18 53.5 61.5
HGBX-050
1/2″ X 1/2″
0.75 158.5 70 123 120 52 82 66 10.5 96 90 40 70 11 30 71 80
80-M 443 165 91 200 61.0 8.5 8.0 199 152 100 125 13.0 25 58.5 67.5
HGBX-075
3/4″ X 3/4″
1.00 196.0 80 153 134 60 92 75 10.5 123.5 108 45 85 13 35 80 80
80-M 481 213 110 200 63.0 8.5 10.0 228 152 100 125 16.0 25 66.13 66.0
HGBX-100
1″ X 1″
2.0 204.0 90 158 150 68 100 83 10.5 131 120 50 93 16 35 90 90
90-L 544 195 125 186 66.0 10.5 10.0 150 251 168 125 140 19.0 25 73 73
HGBX-125
1 1/4″ X 1 1/4″
3.00 244.0 100 196 168 75 115 94 125 157 145 60 105 19 40 100 100
100-L 624 215 155 250 67.0 10.5 12.5 160 299 192 140 160 22.5 32 80.5 80.5
HGBX-150
1 1/2″ X 1 1/2″
5.00 263.0 108 203 190 85 125 105 12.5 165 150 70 115 24 45 112 112
112-M 668 235 160 275 81.0 10.5 12.5 170 314 222 140 190 23.5 35 90 90
HGBX-200
2″ X 2″
7.5 323.5 142 253 232 100 148 125.0 12.5 210 190 100 140 24 55 132 132
132-S 793 275 196 320 95.0 14.0 15.0 190 404 254 140 216 28.0 40 105 105
HGBX-250
2 1/2″ X 2 1/2″
10.00 382 160 298 260 115 165 140 12.5 242 210 120 155 27.0 70 160 132
132-M 892 275 222 320 108.5 14.0 18.0 190 438 254 178 216 31.0 45 128 100

USES

Due to simple & compact design & with mono-block version these pumps are ideally suitale for OE application of engine lubrication, pumping & heating units, oil filtration, cleaning & cooling systems. The pump can also be used for general purpose application to handle viscous liquid such as fuel oil, lube oil, LSHS, mineral oil, transformer oil, LDO paints, varnish, glue, glycerine, soap solution, sugar solution & molasses.